Scissor Lift with Sliding Roll Outs

Rated 5/5 based on 1reviews

Scissor Lift with Sliding Roll Outs   Designed for use in a fabrication area this manually positioned scissors lift has some special features.  The unique platform incorporates (5) individual ro

Scissor Lift with Sliding Roll Outs

 

Designed for use in a fabrication area this manually positioned scissors lift has some special features.  The unique platform incorporates (5) individual roll-out sections that allow it to be configured around the product providing a safer more ergonomic work area.  The roll-out sections can be individually positioned and then locked into place by pneumatically actuated compression locks.

Scissor Lift with Sliding Roll Outs With a 1200# capacity, safety harness attachment points and a maximum raised height of 72” this lift rolls easily on the four steel, swivel locking casters allowing the operators to position it where they need it.  In addition to the locking casters, the base includes a compression floor lock to secure the platform in position during work process.  Powered by air, the platform controls include Up/Down, Emergency Stop, Emergency Down, Roll-out Lock and a 3/8” NPT air connection.  The base controls include Up/Down and Emergency stop in addition to an OSHA Lock-out/Tag-out shut off.

 

Scissor Lift with Sliding Roll Outs Specifications:

 

  • Main Platform 120″ long by 36″ wide
  • Overall unit dimension approximately 36″ wide by 14′ long (not including the accordion skirt option)
  • One side of platform to have five (5) 24″ wide manual roll-out sections capable of extending up to 12″ from main platform.
  • Pneumatic compression lock system to secure roll-out sections when extended
  • Deck material to be diamond tread safety plate
  • Lift operation requires a clean, dry air supply of that can support 50 SCFM at 90 PSI.

Operation:

  • Lowered platform height of approximately 26″
  • Maximum raised platform height of 72″
  • Lift speed: 8-12 feet per minute (up or down)
  • Maximum platform capacity of 1,200lbs.

Platform:

  • 42″ high guardrails with 4″ toe board on (3) sides
  • (2) safety harness attachment points located on back rail of platform
  • Self closing, self-locking access gate on one end of platform
  • Platform Controls include; Up/ Down, Emergency Stop, Emergency Down, and Roll-out lock
  • ½” NPT auxiliary air connection in operator platform.

Lift Base:

  • Platform entry  to include non-slip entry stairs w/ hand rails which will be fixed to unit
  • Unit will include (4) swivel casters with locks
  • Manual activated compression floor lock to secure platform during operation
  • Base controls with Up/Down and OSHA approved main air shut-off/lock-out

Safety:

  • Holding valve on cylinder to prevent uncontrolled descent in the event of hydraulic system failure
  • Accordion Bellows Skirt to enclose scissors mechanisms
  • Base controls with Up/Down and OSHA approved main air shut-off/lock-out

 

 

For further information this product, please phone Upright Aluminum Scaffolds at (480)269-7448


Request Quote For Scissor Lift with Sliding Roll Outs

Related Products